Publication detail

Correlation of die clearance value computed and experimentally determined during drawing of tinned sheet

DVOŘÁK, M.

Czech title

Porovnání tažné mezery početně a experimentem při tažení pocínovaného plechu.

English title

Correlation of die clearance value computed and experimentally determined during drawing of tinned sheet

Type

journal article - other

Language

en

Original abstract

The aim of this study is calculation of die clearance from literature data followed by experimental verification on steel sheets. Steel sheet, thickness 0,24 mm elektroplated on both sides by tin with surface density 5,6/5,6 g/m2 was selected. For experiments the drawing die was developed on Tu of Brno. The uniformity of wall thickness of cylindrical shells without flange was measured on lines oriented 0, 45 and 90 with respect to the drawing direction. The results could be utilized in press shops.

Czech abstract

Výpočet tažné mezery podle různých autorů a její verifikace experimentem na VUT v Brně. Plech tloušťky 0,24 mm elektrolyticky oboustranně pocínovaný o hmotnosti povlaku 5,6/5,6 g/m2. Tažení bylo provedeno na VUT v Brně. Měření změny tloušťky bylo provedeno s respektováním úhlů 0, 45 a 90 stupňů ke směru válcování plechu. Výsledky mohou být využity v praxi.

English abstract

The aim of this study is calculation of die clearance from literature data followed by experimental verification on steel sheets. Steel sheet, thickness 0,24 mm elektroplated on both sides by tin with surface density 5,6/5,6 g/m2 was selected. For experiments the drawing die was developed on Tu of Brno. The uniformity of wall thickness of cylindrical shells without flange was measured on lines oriented 0, 45 and 90 with respect to the drawing direction. The results could be utilized in press shops.

Keywords in English

Drawing, die clearance, Sn coating

RIV year

2003

Released

01.11.2003

Publisher

FTS Novi Sad

Location

Serbia and Montenegro

ISSN

0354-3870

Journal

Journal for TECHNOLOGY OF PLASTICITY

Volume

28

Number

1-2

Pages from–to

65–71

Pages count

7

BIBTEX


@article{BUT41883,
  author="Milan {Dvořák},
  title="Correlation of die clearance value computed and experimentally determined during drawing of tinned sheet",
  journal="Journal for TECHNOLOGY OF PLASTICITY",
  year="2003",
  volume="28",
  number="1-2",
  month="November",
  pages="65--71",
  publisher="FTS Novi Sad",
  address="Serbia and Montenegro",
  issn="0354-3870"
}