Detail publikace
Porovnání tažné mezery početně a experimentem při tažení pocínovaného plechu.
DVOŘÁK, M.
Český název
Porovnání tažné mezery početně a experimentem při tažení pocínovaného plechu.
Anglický název
Correlation of die clearance value computed and experimentally determined during drawing of tinned sheet
Typ
článek v časopise - ostatní, Jost
Jazyk
en
Originální abstrakt
The aim of this study is calculation of die clearance from literature data followed by experimental verification on steel sheets. Steel sheet, thickness 0,24 mm elektroplated on both sides by tin with surface density 5,6/5,6 g/m2 was selected. For experiments the drawing die was developed on Tu of Brno. The uniformity of wall thickness of cylindrical shells without flange was measured on lines oriented 0, 45 and 90 with respect to the drawing direction. The results could be utilized in press shops.
Český abstrakt
Výpočet tažné mezery podle různých autorů a její verifikace experimentem na VUT v Brně. Plech tloušťky 0,24 mm elektrolyticky oboustranně pocínovaný o hmotnosti povlaku 5,6/5,6 g/m2. Tažení bylo provedeno na VUT v Brně. Měření změny tloušťky bylo provedeno s respektováním úhlů 0, 45 a 90 stupňů ke směru válcování plechu. Výsledky mohou být využity v praxi.
Anglický abstrakt
The aim of this study is calculation of die clearance from literature data followed by experimental verification on steel sheets. Steel sheet, thickness 0,24 mm elektroplated on both sides by tin with surface density 5,6/5,6 g/m2 was selected. For experiments the drawing die was developed on Tu of Brno. The uniformity of wall thickness of cylindrical shells without flange was measured on lines oriented 0, 45 and 90 with respect to the drawing direction. The results could be utilized in press shops.
Klíčová slova anglicky
Drawing, die clearance, Sn coating
Rok RIV
2003
Vydáno
01.11.2003
Nakladatel
FTS Novi Sad
Místo
Serbia and Montenegro
ISSN
0354-3870
Časopis
Journal for TECHNOLOGY OF PLASTICITY
Ročník
28
Číslo
1-2
Strany od–do
65–71
Počet stran
7
BIBTEX
@article{BUT41883,
author="Milan {Dvořák},
title="Correlation of die clearance value computed and experimentally determined during drawing of tinned sheet",
journal="Journal for TECHNOLOGY OF PLASTICITY",
year="2003",
volume="28",
number="1-2",
month="November",
pages="65--71",
publisher="FTS Novi Sad",
address="Serbia and Montenegro",
issn="0354-3870"
}