Publication detail
Transmission error analysis for heavy-duty gearbox
KUČERA, P. PÍŠTĚK, V. PROKOP, A. ŘEHÁK, K.
English title
Transmission error analysis for heavy-duty gearbox
Type
conference paper
Language
en
Original abstract
This paper deals with an analysis of the transmission error. For this purpose, the measuring loop was assembled from two gear boxes. Subsequently, angles, torque and shaft speed were set or measured. For the evaluation a calculation method was used and the impact of the different transmitted torque was evaluated. The measuring loop enables to test at different operation conditions of torque and shaft rotation direction. In this paper, the static transmission error analysis for braking mode at 50 rpm shaft speed and torque range from 600 to 2400 Nm is described.
English abstract
This paper deals with an analysis of the transmission error. For this purpose, the measuring loop was assembled from two gear boxes. Subsequently, angles, torque and shaft speed were set or measured. For the evaluation a calculation method was used and the impact of the different transmitted torque was evaluated. The measuring loop enables to test at different operation conditions of torque and shaft rotation direction. In this paper, the static transmission error analysis for braking mode at 50 rpm shaft speed and torque range from 600 to 2400 Nm is described.
Keywords in English
transmission error, gearbox, Matlab, measurement, torque, tooth
Released
22.05.2018
Publisher
JVE Intenational
Location
Kaunas, Lithuania
ISSN
2345-0533
Book
Vibroengineering PROCEDIA
Volume
18
Number
1
Pages from–to
113–116
Pages count
4
BIBTEX
@inproceedings{BUT147700,
author="Pavel {Kučera} and Václav {Píštěk} and Aleš {Prokop} and Kamil {Řehák},
title="Transmission error analysis for heavy-duty gearbox",
booktitle="Vibroengineering PROCEDIA",
year="2018",
volume="18",
number="1",
month="May",
pages="113--116",
publisher="JVE Intenational",
address="Kaunas, Lithuania",
issn="2345-0533"
}