Detail publikace
Transmission error analysis for heavy-duty gearbox
KUČERA, P. PÍŠTĚK, V. PROKOP, A. ŘEHÁK, K.
Anglický název
Transmission error analysis for heavy-duty gearbox
Typ
článek ve sborníku ve WoS nebo Scopus
Jazyk
en
Originální abstrakt
This paper deals with an analysis of the transmission error. For this purpose, the measuring loop was assembled from two gear boxes. Subsequently, angles, torque and shaft speed were set or measured. For the evaluation a calculation method was used and the impact of the different transmitted torque was evaluated. The measuring loop enables to test at different operation conditions of torque and shaft rotation direction. In this paper, the static transmission error analysis for braking mode at 50 rpm shaft speed and torque range from 600 to 2400 Nm is described.
Anglický abstrakt
This paper deals with an analysis of the transmission error. For this purpose, the measuring loop was assembled from two gear boxes. Subsequently, angles, torque and shaft speed were set or measured. For the evaluation a calculation method was used and the impact of the different transmitted torque was evaluated. The measuring loop enables to test at different operation conditions of torque and shaft rotation direction. In this paper, the static transmission error analysis for braking mode at 50 rpm shaft speed and torque range from 600 to 2400 Nm is described.
Klíčová slova anglicky
transmission error, gearbox, Matlab, measurement, torque, tooth
Vydáno
22.05.2018
Nakladatel
JVE Intenational
Místo
Kaunas, Lithuania
ISSN
2345-0533
Kniha
Vibroengineering PROCEDIA
Ročník
18
Číslo
1
Strany od–do
113–116
Počet stran
4
BIBTEX
@inproceedings{BUT147700,
author="Pavel {Kučera} and Václav {Píštěk} and Aleš {Prokop} and Kamil {Řehák},
title="Transmission error analysis for heavy-duty gearbox",
booktitle="Vibroengineering PROCEDIA",
year="2018",
volume="18",
number="1",
month="May",
pages="113--116",
publisher="JVE Intenational",
address="Kaunas, Lithuania",
issn="2345-0533"
}