Product detail
Preparation for contact temperature measurements in the EHD contact
SVOBODA, P. KŘUPKA, I. MEDLÍK, J. ČUDEK, V.
Czech title
Přípravek pro kontaktní měření teploty v EHD kontaktu
English title
Preparation for contact temperature measurements in the EHD contact
Type
functional specimen
Czech abstract
Natáčení konektoru do kontaktu je řešeno natáčením kolem čepu. Stejné je i zajištění polohy termočlánku. Pro přichycení lineárních ložisek byl použit support. V kostce je díra se závitem, do které se zašroubuje jistící šroub a dotažením se zajistí poloha termočlánku. Pro uchycení termočlánku na supporty byla vytvořena příchytka. Na vnitřní straně má vyfrézované vybrání, do kterého zapadá konektor termočlánku. Příchytka je přišroubována k supportu. Utáhnutím čtyř šroubů dojde k přitažení příchytky k supportu a tím k upevnění konektoru mezi supportem a příchytkou. Výhodami řešení je zmenšení rozměrů konzoly, použití kratšího termočlánku s větším průměrem pláště a použití lineárních ložisek pro posuv v ose y. Díky termočlánku s větším průměrem pláště odpadá použití trubičky a jejího složitého uchycení k termočlánku.
English abstract
Filming of the connector contact is solved by turning around the pin. The same is securing the position of the thermocouple. For the attachment of linear bearing support was used. In a nutshell, the hole is threaded, is screwed into the retaining screw and tighten to secure the thermocouple. To attach the thermocouple was created at support bracket. The inner side has a milled recess into which fits the connector thermocouple. Clamp is bolted to the support. Tightening the four screws will clamp, pulling the support and thus to strengthen and support the connector clip. Advantage is a dimension reduction console, use shorter thermocouple with a larger diameter tires and the use of linear bearings for movement in the y With thermocouple with a larger diameter casing pipes and eliminates the use of complex attachment to the thermocouple.
Create date
28.09.2010
Location
laboratoř č. A2/423 ÚSTAV KONSTRUOVÁNÍ Fakulta strojního inženýrství Vysoké učení technické v Brně Technická 2896/2 616 69 BRNO
WWW