Publication detail

Redistribution of Interstcial Elements in Dissimilar Welds od Creep-Resistant Steels with Increased Nitrogen Content.

ZLÁMAL, B. FORET, R. SOPOUŠEK, J. BURŠÍK, J.

Czech title

Redistribuce intersticiálních prvků v heterogenních spojích žárupevných ocelí.

English title

Redistribution of Interstcial Elements in Dissimilar Welds od Creep-Resistant Steels with Increased Nitrogen Content.

Type

conference paper

Language

en

Original abstract

The efficiency of conventional fossil power plants strongly depends on steam temperature and pressure. Research and development of heat-resistant steels for high-efficient power plants are being now promoted worldwide in order to reduce emissions of environmentally damaging gases such as CO2. The development of stronger high temperature materials call for not only creep strength improvement but also resistance to fireside and steamside corrosion, fabricability and weldability. Great advancement has been achieved in the analysis of microstructure instability causing a loss of creep strength and the theoretical modelling of precipitation sequences taking place in creep resistant steels welds. The dissimilar laboratory welds of bainitic T25 steel, currently being developed, and modified martensitic chromium P91 steel have been subject of study. Both base materials were ion-nitrided and homogenized at 1050 C/24h before welding. The redistribution of interstitials (C, N) and phase profiles in the weld joints were simulated using DICTRA software package at different annealing conditions of 600 C/240h and 900 C/18h. The results from the simulation were compared with experimental observations. A relatively good agreement between the simulation and the experiments was observed.

Czech abstract

Účinnost tepelných elektráren závisí na pracovní teplotě a tlaku přehřáté páry. V důsledku snižování emisí skleníkových plynů, zejména CO2, je v současné době výzkum a vývoj žárupevných materiálů podporován na celém světě. Vývoj nových materiálů pro vysoké teploty si klade za cíl nejen zvýšení žárupevnosti, ale i odolnosti proti opalu, oxidaci v prostředí vodní páry, tvařitelnosti a především svařitelnosti. Výrazného pokroku bylo dosaženo v oblasti studia strukturní nestability a počítačového modelování precipitačních pochodů v heterogenních svarech žárupevných ocelí. Předmětem našeho studia je heterogenní svarový spoj nově vyvíjené bainitické oceli T25 s modifikovanou martenzitickou chromovou ocelí P91. Oba základní materiály byly před svařením iontově nitridovány a následně homogenizovány při 1050 C/24h. Pomocí programu DICTRA byly provedeny simulace rozdělení intersticiálních prvků (uhlíku a dusíku) a fázových profilů ve svarovém spoji při podmínkách žíhání 600 C/240h a 900 C/18h. Vypočtené závislosti byly porovnány s experimentálně získanými výsledky. Výsledky počítačové simulace jsou ve velmi dobré shodě s experimentem.

English abstract

The efficiency of conventional fossil power plants strongly depends on steam temperature and pressure. Research and development of heat-resistant steels for high-efficient power plants are being now promoted worldwide in order to reduce emissions of environmentally damaging gases such as CO2. The development of stronger high temperature materials call for not only creep strength improvement but also resistance to fireside and steamside corrosion, fabricability and weldability. Great advancement has been achieved in the analysis of microstructure instability causing a loss of creep strength and the theoretical modelling of precipitation sequences taking place in creep resistant steels welds. The dissimilar laboratory welds of bainitic T25 steel, currently being developed, and modified martensitic chromium P91 steel have been subject of study. Both base materials were ion-nitrided and homogenized at 1050 C/24h before welding. The redistribution of interstitials (C, N) and phase profiles in the weld joints were simulated using DICTRA software package at different annealing conditions of 600 C/240h and 900 C/18h. The results from the simulation were compared with experimental observations. A relatively good agreement between the simulation and the experiments was observed.

Keywords in English

creep-resistant steels, structural stability, modelling

RIV year

2006

Released

23.05.2006

Publisher

TANGER, spol. s r.o., Ostrava

Location

Ostrava

ISBN

80-86840-18-2

Book

METAL 2006, Sborník přednášek

Edition number

1

Pages count

8

BIBTEX


@inproceedings{BUT19209,
  author="Bronislav {Zlámal} and Rudolf {Foret} and Jiří {Sopoušek} and Jiří {Buršík},
  title="Redistribution of Interstcial Elements in Dissimilar Welds od Creep-Resistant Steels with Increased Nitrogen Content.",
  booktitle="METAL 2006, Sborník přednášek",
  year="2006",
  month="May",
  publisher="TANGER, spol. s r.o., Ostrava",
  address="Ostrava",
  isbn="80-86840-18-2"
}