Publication detail

DESIGN OF QUENCHING UNITS FOR HEAT TREATMENT OF TUBES

CHABIČOVSKÝ, M. HORSKÝ, J. RAUDENSKÝ, M. HNÍZDIL, M. KOTRBÁČEK, P.

Czech title

Návrh kalících sekcí pro tepelné zpracování trubek

English title

DESIGN OF QUENCHING UNITS FOR HEAT TREATMENT OF TUBES

Type

conference paper

Language

en

Original abstract

A new experimental device for testing and design of cooling units for control cooling of tubes was developed at the Brno University of Technology. This device can provide detailed information about the distribution of cooling intensity (heat transfer coefficient and heat flux) on the surface of a moving tube which is sprayed by nozzles. The hot test tube (maximum used diameter is currently 300 mm) is moving through cylindrical cooling zones equipped with nozzles and the cooling intensity is measured. The device is primarily used for the design of spray cooling units; the following parameters are typically studied: type of nozzles, feeding pressure, geometrical distribution of the nozzles, and influence of the velocity of the tube passing through the unit. The paper is describing the device and also is presenting the results of the experiments performed within parametric cooling study.

Czech abstract

Na Vysokém učení technickém v Brně bylo vyvinuto a postaveno nové zařízení pro testování a konstrukci chladicích sekcí pro trubky. Toto zařízení poskytuje detailní informaci o rozložení chladící intensity (součinitel přestupu tepla a hustota tepelného toku) na povrchu pohybující se trubky chlazené vodními tryskami. Nahřátá trubka prochází válcovou chladící sekcí vybavenou tryskami a chladící intenzita je měřena. Zařízení je primárně určeno pro konstrukci sprchových chladicích sekcí. Dále zařízení umožňuje stadium typických parametrů jako: typ trysky, tlak vody, geometrické uspořádání trysek a rychlost pohybu chlazené trubky. Článek popisuje zařízení a také prezentuje výsledky experimentů. Klíčová slova: tepelné zpracování, součinitel přestupu tepla, trubka, chladící intenzita

English abstract

A new experimental device for testing and design of cooling units for control cooling of tubes was developed at the Brno University of Technology. This device can provide detailed information about the distribution of cooling intensity (heat transfer coefficient and heat flux) on the surface of a moving tube which is sprayed by nozzles. The hot test tube (maximum used diameter is currently 300 mm) is moving through cylindrical cooling zones equipped with nozzles and the cooling intensity is measured. The device is primarily used for the design of spray cooling units; the following parameters are typically studied: type of nozzles, feeding pressure, geometrical distribution of the nozzles, and influence of the velocity of the tube passing through the unit. The paper is describing the device and also is presenting the results of the experiments performed within parametric cooling study.

Keywords in Czech

tepelné zpracování, součinitel přestupu tepla, trubka, chladící intenzita

Keywords in English

Heat treatment, Quenching, Heat transfer coefficient, Tube, Cooling intensity

RIV year

2015

Released

20.05.2015

Publisher

Associazione Italiana di metallurgia

Location

Miláno

ISBN

978-88-98990-03-0

Book

European conference on Heat treatment 2015 a 22nd IFHTSE congres

Pages from–to

1–9

Pages count

9

BIBTEX


@inproceedings{BUT114805,
  author="Martin {Chabičovský} and Jaroslav {Horský} and Miroslav {Raudenský} and Milan {Hnízdil} and Petr {Kotrbáček},
  title="DESIGN OF QUENCHING UNITS FOR HEAT TREATMENT OF TUBES",
  booktitle="European conference on Heat treatment 2015 a 22nd IFHTSE congres",
  year="2015",
  month="May",
  pages="1--9",
  publisher="Associazione Italiana di metallurgia",
  address="Miláno",
  isbn="978-88-98990-03-0"
}