Publication detail

Chevron crack prediction using the extremely low stress triaxiality test

ŠEBEK, F. KUBÍK, P. PETRUŠKA, J.

Czech title

Predikce chevron trhlin s použitím testu s extrémně nízkou triaxialitou napětí

English title

Chevron crack prediction using the extremely low stress triaxiality test

Type

journal article in Scopus

Language

en

Original abstract

Forward extrusion is typical way of mass-production of cold formed bars or rods with constant cross section. This process is used for production of engine alternator shafts and it is based on reducing the diameter of semi-product without removing material in several reductions. However, there is a potential danger of the chevron cracking. Chevron cracks are inside the material and therefore invisible on the surface of the semi-product. Using computational methods, the potential cracking can be predicted in advance, therefore it may lead to considerable savings. Three various phenomenological ductile fracture criteria were calibrated and then applied to forward extrusion process. As there are specific stress states in this process, new extremely low stress triaxiality fracture test were designed and used in the criteria calibration process. The test is based on the compression of the cylinder with a specific recess. Then, the criteria prediction ability and reliability is discussed.

Czech abstract

Dopředné protlačování je typická cesta sériové výroby tyčí či prutů tvářených za studena s konstantním příčným průřezem. Tento proces je používaný pro výrobu alternátorových hřídelí motoru a je založen na redukci průměru polotovaru bez odstraňování materiálu v několika redukcích. Je zde nicméně potenciální riziko chevron trhlin. Chevron trhliny jsou uvnitř materiálu a proto neviditelné na povrchu polotovaru. S pomocí výpočtových metod může být potenciální porušování dopředu predikováno, a proto toto může vést k nezanedbatelným úsporám. Tři různá fenomenologická kritéria tvárného porušování byla nakalibrována a poté aplikována na proces dopředného protlačování. Jelikož jsou v procesu specifické stavy napjatosti, byl navržen nový lomový test při extrémně nízké triaxialitě napětí a použit v procesu kalibrace kritérií. Test je založen na pěchování válečku se specifickým vybráním. Poté je diskutována schopnost predikce a spolehlivost kritérií.

English abstract

Forward extrusion is typical way of mass-production of cold formed bars or rods with constant cross section. This process is used for production of engine alternator shafts and it is based on reducing the diameter of semi-product without removing material in several reductions. However, there is a potential danger of the chevron cracking. Chevron cracks are inside the material and therefore invisible on the surface of the semi-product. Using computational methods, the potential cracking can be predicted in advance, therefore it may lead to considerable savings. Three various phenomenological ductile fracture criteria were calibrated and then applied to forward extrusion process. As there are specific stress states in this process, new extremely low stress triaxiality fracture test were designed and used in the criteria calibration process. The test is based on the compression of the cylinder with a specific recess. Then, the criteria prediction ability and reliability is discussed.

Keywords in Czech

dopředné protlačování; tvárné porušování; extrémně nízká triaxialita napětí; explicitní metoda konečných prvků; AISI 1045

Keywords in English

forward extrusion; ductile fracture; extremely low stress triaxiality; explicit finite element method; AISI 1045

RIV year

2015

Released

03.06.2015

ISSN

1803-1269

Number

June

Pages from–to

617–621

Pages count

5

BIBTEX


@article{BUT114704,
  author="František {Šebek} and Petr {Kubík} and Jindřich {Petruška},
  title="Chevron crack prediction using the extremely low stress triaxiality test",
  year="2015",
  number="June",
  month="June",
  pages="617--621",
  issn="1803-1269"
}