Publication detail

Influence of the Testing Machine’s Stiffness on the Calibration Process of Ductile Failure Models

KUBÍK, P. ŠEBEK, F. PETRUŠKA, J. HŮLKA, J.

Czech title

Vliv tuhosti zkušebního stroje na proces kalibrace modelů tvárného porušování

English title

Influence of the Testing Machine’s Stiffness on the Calibration Process of Ductile Failure Models

Type

journal article - other

Language

en

Original abstract

The paper deals with evaluation of the influence of the stiffness of testing machine on the calibration of parameters of ductile fracture models. The calibration is based on numerical simulation of experiments, realized by the special notched tube specimen. These are exposed to combined loading with different proportions between axial and torsional loading components. Input data for the computational simulation of experiments can either be based on theoretical proportion between the axial and torsional movement of the testing machine mechanism, or taken directly from specimen displacements measured by digital image correlation on the specimen's surface. The results show the difference in calibration parameters obtained by both methods.

Czech abstract

Příspěvek se zabývá hodnocením vlivu tuhosti zkušebního stroje na kalibraci parametrů modelů tvárného porušování. Kalibrace je založena na numerické simulaci experimentů, realizované pomocí speciálních vzorků vrubovaných trubek. Ty jsou vystaveny kombinaci zatížení s různými poměry mezi axiální a torzní složkou zatěžování. Vstupní data pro výpočetní simulaci experimentů můžou být založena buď na základě teoretického poměru mezi axiálním a torzním pohybem mechanismu testovacího stroje, nebo vzata přímo z posunutí měřených digitální obrazovou korelací na povrchu vzorku. Výsledky ukazují rozdíl v kalibračních parametrech získaných z obou metod.

English abstract

The paper deals with evaluation of the influence of the stiffness of testing machine on the calibration of parameters of ductile fracture models. The calibration is based on numerical simulation of experiments, realized by the special notched tube specimen. These are exposed to combined loading with different proportions between axial and torsional loading components. Input data for the computational simulation of experiments can either be based on theoretical proportion between the axial and torsional movement of the testing machine mechanism, or taken directly from specimen displacements measured by digital image correlation on the specimen's surface. The results show the difference in calibration parameters obtained by both methods.

Keywords in Czech

tuhost stroje; ARAMIS; poměr zatěžování; model tvárného porušování; křivka zpevnění

Keywords in English

machine’s stiffness; ARAMIS; loading ratio; ductile failure model; flow curve

RIV year

2013

Released

28.11.2013

ISSN

1801-1217

Volume

9

Number

34

Pages from–to

31–34

Pages count

4

BIBTEX


@article{BUT110741,
  author="Petr {Kubík} and František {Šebek} and Jindřich {Petruška} and Jiří {Hůlka},
  title="Influence of the Testing Machine’s Stiffness on the Calibration Process of Ductile Failure Models",
  year="2013",
  volume="9",
  number="34",
  month="November",
  pages="31--34",
  issn="1801-1217"
}