Detail publikace
Vliv proteinů na formování mazacího filmu v kontaktech mazaných hovězím sérem za podmínek valení a skluzu
VRBKA, M. NÁVRAT, T. KŘUPKA, I. HARTL, M. GALLO, J.
Český název
Vliv proteinů na formování mazacího filmu v kontaktech mazaných hovězím sérem za podmínek valení a skluzu
Anglický název
EFFECT OF PROTEINS ON FILM FORMATION IN BOVINE SERUM LUBRICATED CONTACTS UNDER ROLLING/SLIDING CONDITIONS
Typ
článek ve sborníku ve WoS nebo Scopus
Jazyk
en
Originální abstrakt
The aim of this study is to perform detail experimental mapping of the lubricating film thickness of bovine serum (BS) within the contact between an artificial metal or ceramic femoral head and a glass disc and analyze effect of proteins on the film formation under rolling/sliding conditions. The film thickness was studied experimentally using an optical test rig as a function of time under variety of constant mean speeds. Chromatic interferograms were recorded with a high-speed digital camera and evaluated with thin film colorimetric interferometry. Under pure rolling conditions it was observed that the central film thicknesses increased with time for all measurements. When the disc was slower than head then the measured central film thicknesses achieved values only about some few nanometres, whereas when the tests were realized with faster disc then measured central film thicknesses achieved significantly higher values. Distribution of the film thickness within the contact zone is not homogeneous and two different film thickness regions can be found; thicker protein film and thinner base film that both show specific behaviour over time. This study showed that protein formation plays an important role in the lubrication processes of artificial joints of the human. Due to challenging of this study the more complex research work is carried out at the present time.
Český abstrakt
Uvedený článek se zabývá experimentálním studiem vlivu proteinů obsažených v hovězím séru na formování mazacího filmu v elastohydrodynamických kontaktech za podmínek valení a skluzu.
Anglický abstrakt
The aim of this study is to perform detail experimental mapping of the lubricating film thickness of bovine serum (BS) within the contact between an artificial metal or ceramic femoral head and a glass disc and analyze effect of proteins on the film formation under rolling/sliding conditions. The film thickness was studied experimentally using an optical test rig as a function of time under variety of constant mean speeds. Chromatic interferograms were recorded with a high-speed digital camera and evaluated with thin film colorimetric interferometry. Under pure rolling conditions it was observed that the central film thicknesses increased with time for all measurements. When the disc was slower than head then the measured central film thicknesses achieved values only about some few nanometres, whereas when the tests were realized with faster disc then measured central film thicknesses achieved significantly higher values. Distribution of the film thickness within the contact zone is not homogeneous and two different film thickness regions can be found; thicker protein film and thinner base film that both show specific behaviour over time. This study showed that protein formation plays an important role in the lubrication processes of artificial joints of the human. Due to challenging of this study the more complex research work is carried out at the present time.
Klíčová slova česky
biotribologie, hovězí sérum, tloušťka filmu, protein
Klíčová slova anglicky
biotribology, bovine serum, film thickness, protein
Rok RIV
2012
Vydáno
08.10.2012
Nakladatel
ASME
Místo
Denver, Colorado, USA
ISBN
978-0-7918-4508-0
Kniha
ASME/STLE 2012 Joint Tribology Conference (IJTC2012)
Číslo edice
1
Strany od–do
1–3
Počet stran
3
BIBTEX
@inproceedings{BUT99016,
author="Martin {Vrbka} and Tomáš {Návrat} and Ivan {Křupka} and Martin {Hartl} and Jiří {Gallo},
title="EFFECT OF PROTEINS ON FILM FORMATION IN BOVINE SERUM LUBRICATED CONTACTS UNDER ROLLING/SLIDING CONDITIONS",
booktitle="ASME/STLE 2012 Joint Tribology Conference (IJTC2012)",
year="2012",
month="October",
pages="1--3",
publisher="ASME",
address="Denver, Colorado, USA",
isbn="978-0-7918-4508-0"
}