Stanovení optimální tvářecí teploty ložiskové oceli 100CrMo7-3 a 100CrMnSi6-4 pro různé podmínky tepelného zpracování

Estabilishing of Optimum Forming Temterature on 100CrMo7-3 and 100CrMnSi6-4 Bearing Steels under Partial Heating Conditions

abstrakt

en

The forming process is associated with the plastic deformation capability of materials. The formability of metals and alloys is influenced by physical-metallurgical properties of material and by external forming conditions, forming temperature in particular. A kind of borderline for the division of forming is the recrystallization temperature, according to which forming is divided into cold forming, partially hot forming and hot forming. The paper is concerned with problems of optimizing the temperature of forming grade 100CrMo7-3 and 100CrMnSi6-4 bearing steel under partial heating. Experimental establishment of the optimum range of forming temperatures was based on the results of tensile testing at elevated temperatures from 100 to 800oC. Experimental verification of the behaviour of bearing steel under pressure was conducted via the upsetting test at elevated temperatures. The experimental part of the work is also concerned with the analysis of phase composition of grade 100CrMo7-3 and 100CrMnSi6-4 bearing steel using computer simulation, and by the verification of simulation via metallographic evaluation.

The forming process is associated with the plastic deformation capability of materials. The formability of metals and alloys is influenced by physical-metallurgical properties of material and by external forming conditions, forming temperature in particular. A kind of borderline for the division of forming is the recrystallization temperature, according to which forming is divided into cold forming, partially hot forming and hot forming. The paper is concerned with problems of optimizing the temperature of forming grade 100CrMo7-3 and 100CrMnSi6-4 bearing steel under partial heating. Experimental establishment of the optimum range of forming temperatures was based on the results of tensile testing at elevated temperatures from 100 to 800oC. Experimental verification of the behaviour of bearing steel under pressure was conducted via the upsetting test at elevated temperatures. The experimental part of the work is also concerned with the analysis of phase composition of grade 100CrMo7-3 and 100CrMnSi6-4 bearing steel using computer simulation, and by the verification of simulation via metallographic evaluation.

The forming process is associated with the plastic deformation capability of materials. The formability of metals and alloys is influenced by physical-metallurgical properties of material and by external forming conditions, forming temperature in particular. A kind of borderline for the division of forming is the recrystallization temperature, according to which forming is divided into cold forming, partially hot forming and hot forming. The paper is concerned with problems of optimizing the temperature of forming grade 100CrMo7-3 and 100CrMnSi6-4 bearing steel under partial heating. Experimental establishment of the optimum range of forming temperatures was based on the results of tensile testing at elevated temperatures from 100 to 800oC. Experimental verification of the behaviour of bearing steel under pressure was conducted via the upsetting test at elevated temperatures. The experimental part of the work is also concerned with the analysis of phase composition of grade 100CrMo7-3 and 100CrMnSi6-4 bearing steel using computer simulation, and by the verification of simulation via metallographic evaluation.

tváření, 100CrMo7-3, 100CrMnSi6-4, ložisková ocel

forming, 100CrMo7-3, 100CrMnSi6-4, bearing steel

03.09.2012

Materials Research Society of Serbia

Belgrade, Serbia

YUCOMAT 2012, The Book of Abstracts

14

98–98

1