Detail publikace

FRICTION OF NON-CONFORMAL CONTACTS UNDER STARVED EHD LUBRICATION

ALI, F. HARTL, M.

Český název

FRICTION OF NON-CONFORMAL CONTACTS UNDER STARVED EHD LUBRICATION

Anglický název

FRICTION OF NON-CONFORMAL CONTACTS UNDER STARVED EHD LUBRICATION

Typ

článek v časopise - ostatní, Jost

Jazyk

en

Originální abstrakt

This paper presents experimental results of measuring the friction coefficient of smooth non-conformal surfaces (ball-on-disk test) in the range of elastohydrodynamic lubrication. The coefficient of friction under starved lubrication was observed under relative sliding motion by using a Tribometer and torque sensor. On the other hand, interferometric images were captured by a digital camera simultaneously with measuring the friction between the ball and disk to illustrate the influence of the air-oil meniscus position on the behavior of friction under the starved lubrication. The results show that the friction of starved contacts depends strongly on the distance of the air-oil meniscus from the Hertzian contact. However, the position of air-oil meniscus is basically related to the entraining velocity, the value of slide-to-roll ratio and the oil amount on the track.

Český abstrakt

This paper presents experimental results of measuring the friction coefficient of smooth non-conformal surfaces (ball-on-disk test) in the range of elastohydrodynamic lubrication. The coefficient of friction under starved lubrication was observed under relative sliding motion by using a Tribometer and torque sensor. On the other hand, interferometric images were captured by a digital camera simultaneously with measuring the friction between the ball and disk to illustrate the influence of the air-oil meniscus position on the behavior of friction under the starved lubrication. The results show that the friction of starved contacts depends strongly on the distance of the air-oil meniscus from the Hertzian contact. However, the position of air-oil meniscus is basically related to the entraining velocity, the value of slide-to-roll ratio and the oil amount on the track.

Anglický abstrakt

This paper presents experimental results of measuring the friction coefficient of smooth non-conformal surfaces (ball-on-disk test) in the range of elastohydrodynamic lubrication. The coefficient of friction under starved lubrication was observed under relative sliding motion by using a Tribometer and torque sensor. On the other hand, interferometric images were captured by a digital camera simultaneously with measuring the friction between the ball and disk to illustrate the influence of the air-oil meniscus position on the behavior of friction under the starved lubrication. The results show that the friction of starved contacts depends strongly on the distance of the air-oil meniscus from the Hertzian contact. However, the position of air-oil meniscus is basically related to the entraining velocity, the value of slide-to-roll ratio and the oil amount on the track.

Klíčová slova česky

Friction, Starved lubrication, Non-conformal surfaces, EHD lubrication

Klíčová slova anglicky

Friction, Starved lubrication, Non-conformal surfaces, EHD lubrication

Rok RIV

2012

Vydáno

14.12.2012

Nakladatel

(MM) Science Journal

Místo

Praha

ISSN

1803-1269

Ročník

2012

Číslo

12

Strany od–do

374–377

Počet stran

4

BIBTEX


@article{BUT96835,
  author="Fadi {Ali} and Martin {Hartl},
  title="FRICTION OF NON-CONFORMAL CONTACTS UNDER STARVED EHD LUBRICATION",
  year="2012",
  volume="2012",
  number="12",
  month="December",
  pages="374--377",
  publisher="(MM) Science Journal",
  address="Praha",
  issn="1803-1269"
}