Analýza povrchově iniciovaného poškození axiálních ložisek s využitím akustické emise

Analysis of Surface Initiated Damage in Thrust Bearings with Acoustic Emission

článek ve sborníku ve WoS nebo Scopus

en

Rolling-element bearings are a significant part of every rotating machine and its fault leads to critical malfunction of the whole device. The vibration-based condition monitoring is commonly used to bearings damage detection. However, the bearing fault diagnostic using acoustic emission (AE) technique is more sensitive to incipient defects. This paper presents the results of the experiments on the grease lubricated thrust bearings, where the artificial dents were created on flat raceway to initiate rolling contact fatigue. The AE parameters, vibration level and temperature were used for description of the bearing condition. A comparison of the acoustic emission signal (parametric analysis) obtained on dented and non-dented bearing is presented. It is concluded that the acoustic emission parameters indicate incipient damage early compared to the vibration-based condition monitoring.

Článek prezentuje výsledky experimentů s axiálními valivými ložisky (mazány tukem), u kterých byly ve valivé dráze vytvořeny vpichy za účelem iniciace únavového poškození. Jsou porovnávány parametry akustické emise v závislosti na míře jejich citlivosti v detekci počátku kontaktního poškození.

Rolling-element bearings are a significant part of every rotating machine and its fault leads to critical malfunction of the whole device. The vibration-based condition monitoring is commonly used to bearings damage detection. However, the bearing fault diagnostic using acoustic emission (AE) technique is more sensitive to incipient defects. This paper presents the results of the experiments on the grease lubricated thrust bearings, where the artificial dents were created on flat raceway to initiate rolling contact fatigue. The AE parameters, vibration level and temperature were used for description of the bearing condition. A comparison of the acoustic emission signal (parametric analysis) obtained on dented and non-dented bearing is presented. It is concluded that the acoustic emission parameters indicate incipient damage early compared to the vibration-based condition monitoring.

Akustická emise, axiální ložiska, kontaktní poškození, pitting, uměle vytvořený vpich

Acoustic emission, thrust bearing, contact damage, pitting, artificial dent

2012

12.09.2012

University of Granada

Granada, Spain

978-84-615-9941-7

Proceedings 30th European Conference on Acoustic Emission Testing, 7th International Conference on Acoustic Emission

114-1–114-7

7