Optimalizace teploty tváření ložiskové oceli 100CrMnSi6-4 za poloohřevu

Optimization of forming temperature of 100CrMnSi6-4 bearing steel under partial heating

článek v časopise - ostatní, Jost

cs

The paper focuses on problems of optimizing the forming temperature of grade 100CrMnSi6-4 bearing steel under partial heating. In order to assess its formability, tensile tests at elevated temperatures ranging from 100 to 800oC were carried out. Tensile diagrams revealed jump changes of mechanical properties in the brittle region under blue heat and in the region of phase transformations. Experimental examination was then concentrated on assessing the plastic deformation capability of the material under pressure at elevated temperatures, by means of the upsetting test. Another goal of the paper consisted in comparing the two experimental methods chosen for establishing the optimum temperatures of forming grade 100CrMnSi6-4 bearing steels at elevated temperatures. To have a complex assessment of the experimental material the structure and phase analyses of the bearing steel were performed in dependence on heating temperature.

The paper focuses on problems of optimizing the forming temperature of grade 100CrMnSi6-4 bearing steel under partial heating. In order to assess its formability, tensile tests at elevated temperatures ranging from 100 to 800oC were carried out. Tensile diagrams revealed jump changes of mechanical properties in the brittle region under blue heat and in the region of phase transformations. Experimental examination was then concentrated on assessing the plastic deformation capability of the material under pressure at elevated temperatures, by means of the upsetting test. Another goal of the paper consisted in comparing the two experimental methods chosen for establishing the optimum temperatures of forming grade 100CrMnSi6-4 bearing steels at elevated temperatures. To have a complex assessment of the experimental material the structure and phase analyses of the bearing steel were performed in dependence on heating temperature.

The paper focuses on problems of optimizing the forming temperature of grade 100CrMnSi6-4 bearing steel under partial heating. In order to assess its formability, tensile tests at elevated temperatures ranging from 100 to 800oC were carried out. Tensile diagrams revealed jump changes of mechanical properties in the brittle region under blue heat and in the region of phase transformations. Experimental examination was then concentrated on assessing the plastic deformation capability of the material under pressure at elevated temperatures, by means of the upsetting test. Another goal of the paper consisted in comparing the two experimental methods chosen for establishing the optimum temperatures of forming grade 100CrMnSi6-4 bearing steels at elevated temperatures. To have a complex assessment of the experimental material the structure and phase analyses of the bearing steel were performed in dependence on heating temperature.

100CrMnSi6-4; bearing stee;l forming temperature; partial heating; tensile test; upsetting test

100CrMo7-3; bearing stee;l forming temperature; partial heating; tensile test; upsetting test

2008

22.10.2008

Politechnika Opolska

Opole

1429-6055

Zeszyty naukowe politechniki Opolskiej seria Mechanika

2008

327

187–192

6