Detail publikace
Cooling efficiency of flat jet nozzles versus full cone nozzles on working roll
ONDROUŠKOVÁ, J. POHANKA, M.
Český název
Cooling efficiency of flat jet nozzles versus full cone nozzles on working roll
Anglický název
Chladící účinky na pracovní válec ploché trysky versus kuželové trysky
Typ
článek ve sborníku ve WoS nebo Scopus
Jazyk
en
Originální abstrakt
Cooling intensity of working rolls is very important in industrial applications. Durability of these rolls strongly depends on proper cooling. In case of working rolls, not covered with a significant water layer, cooling is more effective with full cone nozzles than with flat jet nozzles. This paper is focused on the measurements of the cooling intensity for three different types of nozzles performed on an experimental roll which enables to measure thermal boundary conditions which occur on a real working roll. Two flat jet nozzles with different spray angles and same flow rate and one full cone nozzle with half flow rate for equal pressure were tested. The measurements showed that it is possible to achieve the same cooling intensities with half amount of water.
Český abstrakt
Intenzita chlazení pracovních válců v průmyslu je velmi důležitá z hlediska životnosti. V případě, že pracovní válec není pokryt větší vrstvou chladícího média, ukazuje se, že chlazení kuželovými tryskami je podstatně efektivnější než zažité použití plochých trysek. Příspěvek pojednává o měření intenzity chlazení pro tři různé trysky na experimentálním válci, který umožňuje měřit tepelné okrajové podmínky, které nastávají na skutečném pracovním válci. Byly použity dvě ploché trysky s rozdílným vrcholovým úhlem o shodném průtoku a jedna kuželová tryska o polovičním průtoku při stejných tlacích. Měření prokázala, že i s polovičním množstvím vody je možné docílit shodných chladících intenzit.
Anglický abstrakt
Cooling intensity of working rolls is very important in industrial applications. Durability of these rolls strongly depends on proper cooling. In case of working rolls, not covered with a significant water layer, cooling is more effective with full cone nozzles than with flat jet nozzles. This paper is focused on the measurements of the cooling intensity for three different types of nozzles performed on an experimental roll which enables to measure thermal boundary conditions which occur on a real working roll. Two flat jet nozzles with different spray angles and same flow rate and one full cone nozzle with half flow rate for equal pressure were tested. The measurements showed that it is possible to achieve the same cooling intensities with half amount of water.
Klíčová slova česky
chladící intenzita, tryska, válce
Klíčová slova anglicky
cooling intensity, nozzle, roll
Rok RIV
2010
Vydáno
10.05.2010
ISBN
978-80-87012-26-0
Kniha
Engineering Mechanics 2010 - sborník
Strany od–do
135–136
Počet stran
11
BIBTEX
@inproceedings{BUT29215,
author="Jana {Ondroušková} and Michal {Pohanka},
title="Chladící účinky na pracovní válec ploché trysky versus kuželové trysky",
booktitle="Engineering Mechanics 2010 - sborník",
year="2010",
month="May",
pages="135--136",
isbn="978-80-87012-26-0"
}