Měření vibrací palubní desky vrtulníku EC 120 Colibri

Measurement of the vibration of EC 120 colibri instrument board

článek ve sborníku ve WoS nebo Scopus

en

This paper describes the measurements of the natural frequencies of the EC 120 Colibri instrument board. For this purposes a special instrumentation was installed on board of this helicopter. The accelerometer unit, which was used for subsequent acceleration measurements was positioned it three on board locations. Measurements were performed for thirteen flights configuration. Data were recorded by the data acquisition system DAS 12. The recorded data were processed using Fast Fourier Transformation (FFT). The purpose of these measurements was the establishing of critical amplitude of displacements of instrument board depending up the flight configuration.

Článek popisuje měřené vlastních frekvencí palubní desky vrtulníku, způsob měření, použité měřicí přístroje a způsob vyhodnocení naměřených dat.

This paper describes the measurements of the natural frequencies of the EC 120 Colibri instrument board. For this purposes a special instrumentation was installed on board of this helicopter. The accelerometer unit, which was used for subsequent acceleration measurements was positioned it three on board locations. Measurements were performed for thirteen flights configuration. Data were recorded by the data acquisition system DAS 12. The recorded data were processed using Fast Fourier Transformation (FFT). The purpose of these measurements was the establishing of critical amplitude of displacements of instrument board depending up the flight configuration.

Measurement, In-flight, natural frequencies

04.05.2005

Bologna University

88-901080-2-9-44406

4nd Youth Symposium on Experimental Solid Mechanics

2