Detail publikace
Návrh trysky pro atomizaci odpadních paliv se sníženými emisemi spalin
JEDELSKÝ, J. JÍCHA, M.
Český název
Návrh trysky pro atomizaci odpadních paliv se sníženými emisemi spalin
Anglický název
Design of Atomizer for Waste Fuel Combustion with Decreased Exhaust Gas Emissions
Typ
článek ve sborníku ve WoS nebo Scopus
Jazyk
en
Originální abstrakt
Combustion of waste fuels becomes more and more commonplace. The waste liquids often have low heating value, variable physical properties and may contain solid particles. It is necessary to account for these features when selecting an appropriate atomizer. Our task was to design an atomizer for simultaneous atomization of polymer solution and cracked oil. The polymer solution has high viscosity, low heating value and contains particles up to 2mm in diameter. The oil has a higher heating value and is used to assure an effective combustion. It is important to enable independent control of both liquid flow-rates. The atomizer should be operated under low fluid pressure about 0.2-0.3 MPa and should provide a stable spray of good quality to improve combustion efficiency and decrease exhaust gas emissions compared to the current design.
Český abstrakt
Combustion of waste fuels becomes more and more commonplace. The waste liquids often have low heating value, variable physical properties and may contain solid particles. It is necessary to account for these features when selecting an appropriate atomizer. Our task was to design an atomizer for simultaneous atomization of polymer solution and cracked oil. The polymer solution has high viscosity, low heating value and contains particles up to 2mm in diameter. The oil has a higher heating value and is used to assure an effective combustion. It is important to enable independent control of both liquid flow-rates. The atomizer should be operated under low fluid pressure about 0.2-0.3 MPa and should provide a stable spray of good quality to improve combustion efficiency and decrease exhaust gas emissions compared to the current design.
Anglický abstrakt
Combustion of waste fuels becomes more and more commonplace. The waste liquids often have low heating value, variable physical properties and may contain solid particles. It is necessary to account for these features when selecting an appropriate atomizer. Our task was to design an atomizer for simultaneous atomization of polymer solution and cracked oil. The polymer solution has high viscosity, low heating value and contains particles up to 2mm in diameter. The oil has a higher heating value and is used to assure an effective combustion. It is important to enable independent control of both liquid flow-rates. The atomizer should be operated under low fluid pressure about 0.2-0.3 MPa and should provide a stable spray of good quality to improve combustion efficiency and decrease exhaust gas emissions compared to the current design.
Klíčová slova anglicky
effervescent atomization, waste fuel, exhaust gas emissions, spray
Rok RIV
2006
Vydáno
06.09.2006
Nakladatel
University of Heidelberg, Germany
Místo
Heidelberg, Germany
Kniha
Proceedings 31st International Symposium on Combustion
Číslo edice
1
Strany od–do
34–34
Počet stran
1
BIBTEX
@inproceedings{BUT19885,
author="Jan {Jedelský} and Miroslav {Jícha},
title="Design of Atomizer for Waste Fuel Combustion with Decreased Exhaust Gas Emissions",
booktitle="Proceedings 31st International Symposium on Combustion",
year="2006",
month="September",
pages="34--34",
publisher="University of Heidelberg, Germany",
address="Heidelberg, Germany"
}