Detail publikace

Influence of Aging Temperature on Mechanical Properties and Structure of M300 Maraging Steel Produced by Selective Laser Melting

KOLOMÝ, Š. SEDLÁK, J. ZOUHAR, J. SLANÝ, M. BENČ, M. DOBROCKÝ, D. BARÉNYI, I. MAJERÍK, J.

Anglický název

Influence of Aging Temperature on Mechanical Properties and Structure of M300 Maraging Steel Produced by Selective Laser Melting

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

en

Originální abstrakt

This paper deals with the study of high-strength M300 maraging steel produced using the selective laser melting method. Heat treatment consists of solution annealing and subsequent aging; the influence of the selected aging temperatures on the final mechanical properties-microhardness and compressive yield strength-and the structure of the maraging steel are described in detail. The microstructure of the samples is examined using optical and electron microscopy. The compressive test results show that the compressive yield strength increased after heat treatment up to a treatment temperature of 480 degrees C and then gradually decreased. The sample aged at 480 degrees C also exhibited the highest observed microhardness of 562 HV. The structure of this sample changed from the original melt pools to a relatively fine-grained structure with a high fraction of high-angle grain boundaries (72%).

Anglický abstrakt

This paper deals with the study of high-strength M300 maraging steel produced using the selective laser melting method. Heat treatment consists of solution annealing and subsequent aging; the influence of the selected aging temperatures on the final mechanical properties-microhardness and compressive yield strength-and the structure of the maraging steel are described in detail. The microstructure of the samples is examined using optical and electron microscopy. The compressive test results show that the compressive yield strength increased after heat treatment up to a treatment temperature of 480 degrees C and then gradually decreased. The sample aged at 480 degrees C also exhibited the highest observed microhardness of 562 HV. The structure of this sample changed from the original melt pools to a relatively fine-grained structure with a high fraction of high-angle grain boundaries (72%).

Klíčová slova anglicky

maraging steel, selective laser melting, aging, microhardness, microstructure

Vydáno

20.01.2023

Nakladatel

MDPI

Místo

Basel, Switzerland

ISSN

1996-1944

Ročník

16

Číslo

3

Strany od–do

1–18

Počet stran

18

BIBTEX


@article{BUT183163,
  author="Štěpán {Kolomý} and Josef {Sedlák} and Jan {Zouhar} and Martin {Slaný} and Marek {Benč} and David {Dobrocký} and Igor {Barényi} and Jozef {Majerík},
  title="Influence of Aging Temperature on Mechanical Properties and Structure of M300 Maraging Steel Produced by Selective Laser Melting",
  year="2023",
  volume="16",
  number="3",
  month="January",
  pages="1--18",
  publisher="MDPI",
  address="Basel, Switzerland",
  issn="1996-1944"
}