Detail publikace

Comparison of Various Sublimation Matte Coating Sprays for the Optical 3D Scanning with a Focus on the Quality of 3D Scans

FRANKE, J. KOUTECKÝ, T. KOUTNÝ, D.

Anglický název

Comparison of Various Sublimation Matte Coating Sprays for the Optical 3D Scanning with a Focus on the Quality of 3D Scans

Typ

článek ve sborníku mimo WoS a Scopus

Jazyk

en

Originální abstrakt

Comparison of sublimation matting sprays Aesub Blue, Reflecon Tarnish 11HC and Attblime AB6 for optical 3D scanning is shown in this work. The work shows their matting ability on a high reflexive Si-wafer, effect on the 3D scanning results and sublimation time under elevated temperature. Coatings were deposited by automated system to ensure uniform conditions for each sample. The spray movement speed and spray axial distance were set as constant. The work shows that all used sprays created coatings with considerable thickness which can affect a 3D scanning accuracy. The best scan quality was ensured by 4 layers of Aesub Blue, 1 layer of Reflecon Tarnish 11HC and 2 layers of Attblime AB6. The best coating efficiency was offered by Reflecon Tarnish 11HC. The sublimation time at the temperature of 26.6 °C was about 28 minutes for Aesub Blue, 43 minutes for Reflecon Tarnish 11HC and 136 minutes for Attblime AB6.

Anglický abstrakt

Comparison of sublimation matting sprays Aesub Blue, Reflecon Tarnish 11HC and Attblime AB6 for optical 3D scanning is shown in this work. The work shows their matting ability on a high reflexive Si-wafer, effect on the 3D scanning results and sublimation time under elevated temperature. Coatings were deposited by automated system to ensure uniform conditions for each sample. The spray movement speed and spray axial distance were set as constant. The work shows that all used sprays created coatings with considerable thickness which can affect a 3D scanning accuracy. The best scan quality was ensured by 4 layers of Aesub Blue, 1 layer of Reflecon Tarnish 11HC and 2 layers of Attblime AB6. The best coating efficiency was offered by Reflecon Tarnish 11HC. The sublimation time at the temperature of 26.6 °C was about 28 minutes for Aesub Blue, 43 minutes for Reflecon Tarnish 11HC and 136 minutes for Attblime AB6.

Klíčová slova anglicky

Optical 3D scanning; matte coating; sublimation spray

Vydáno

20.05.2022

Nakladatel

International Frequency Sensor Association (IFSA) Publishing

Místo

Barcelona, Spain

ISBN

978-84-09-40460-5

Kniha

Optics, Photonics and Lasers: Proceedings of the 5th International Conference on Optics, Photonics and Lasers (OPAL' 2022)

Strany od–do

45–47

Počet stran

3

BIBTEX


@inproceedings{BUT183028,
  author="Jakub {Franke} and Tomáš {Koutecký} and Daniel {Koutný},
  title="Comparison of Various Sublimation Matte Coating Sprays for the Optical 3D Scanning with a Focus on the Quality of 3D Scans",
  booktitle="Optics, Photonics and Lasers: Proceedings of the 5th International Conference on Optics, Photonics and Lasers (OPAL' 2022)",
  year="2022",
  month="May",
  pages="45--47",
  publisher="International Frequency Sensor Association (IFSA) Publishing",
  address="Barcelona, Spain",
  isbn="978-84-09-40460-5"
}