Detail publikace

Characterization of beta-Ti Alloy Prepared by SLM Method

VOŇAVKOVÁ, I. VOJTĚCH, D. PALOUŠEK, D.

Anglický název

Characterization of beta-Ti Alloy Prepared by SLM Method

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

en

Originální abstrakt

Ti-6Al-4V alloy is the most commercially used material for the production of orthopedic implants. However, despite its excellent properties, it is not an ideal material for use in medicine in terms of vanadium toxicity and relatively high modulus of elasticity. Titanium beta-alloys could be a suitable replacement in future years for Ti-6Al-4V alloy, as they have a lower modulus of elasticity and contain non-toxic elements. Some of the alloying elements may even increase the biocompatibility of the alloy. In addition, a progressive 3D printing method would allow custom-made implants with the required properties to be printed. The aim of this work was to characterize the beta alloy Ti-30Nb by Selective Laser Melting (SLM) method and to determine its mechanical properties. In addition, heat treatment was applied in order to homogenize the structure. Ti-30Nb alloy was compared in as-built state and in annealed state.

Anglický abstrakt

Ti-6Al-4V alloy is the most commercially used material for the production of orthopedic implants. However, despite its excellent properties, it is not an ideal material for use in medicine in terms of vanadium toxicity and relatively high modulus of elasticity. Titanium beta-alloys could be a suitable replacement in future years for Ti-6Al-4V alloy, as they have a lower modulus of elasticity and contain non-toxic elements. Some of the alloying elements may even increase the biocompatibility of the alloy. In addition, a progressive 3D printing method would allow custom-made implants with the required properties to be printed. The aim of this work was to characterize the beta alloy Ti-30Nb by Selective Laser Melting (SLM) method and to determine its mechanical properties. In addition, heat treatment was applied in order to homogenize the structure. Ti-30Nb alloy was compared in as-built state and in annealed state.

Klíčová slova anglicky

Titanium alloy; Ti-Nb; 3D printing; SLM

Vydáno

14.12.2020

Nakladatel

Jan Evangelista Purkyne Univ

Místo

Usti nad Labem

ISSN

1213-2489

Ročník

20

Číslo

5

Strany od–do

690–696

Počet stran

7

BIBTEX


@article{BUT182823,
  author="Ilona {Voňavková} and Dalibor {Vojtěch} and David {Paloušek},
  title="Characterization of beta-Ti Alloy Prepared by SLM Method",
  year="2020",
  volume="20",
  number="5",
  month="December",
  pages="690--696",
  publisher="Jan Evangelista Purkyne Univ",
  address="Usti nad Labem",
  issn="1213-2489"
}