Detail publikace
Biodegradable WE43 Magnesium Alloy Produced by Selective Laser Melting: Mechanical Properties, Corrosion Behavior, and In-Vitro Cytotoxicity
LOVAŠIOVÁ, P. LOVAŠI, T. KUBÁSEK, J. JABLONSKÁ, E. MSALLAMOVÁ, Š. MICHALCOVÁ, A. VOJTĚCH, D. SUCHÝ, J. KOUTNÝ, D. ALZUBI, E.
Anglický název
Biodegradable WE43 Magnesium Alloy Produced by Selective Laser Melting: Mechanical Properties, Corrosion Behavior, and In-Vitro Cytotoxicity
Typ
článek v časopise ve Web of Science, Jimp
Jazyk
en
Originální abstrakt
In this work, selective laser melting (SLM) technology was used to prepare Mg-4Y-3Nd-Zr (WE43) alloy. This alloy and production method are promising for the design of biodegradable implants. The aim of this study was to investigate the chemical composition, microstructure, mechanical properties, corrosion behavior in simulated body fluid (SBF), and cytotoxicity of the alloy produced by SLM method and to compare it with conventionally gravity cast reference alloy. Analysis of the surface of the revealed an oxygen content of 7 wt.%. Undesirable unmelted and only partially adhered spherical particles of the starting powder were also found. The microstructure of the material was very fine and consisted of alpha-Mg dendritic matrix, beta-Mg-41(Nd, Y)(5) intermetallic phase, Y2O3 inclusions, and 0.6 vol.% of residual porosity. The Vickers hardness, compressive yield strength, compressive strength, and maximum compressive strain were 88 HV0.1, 201 MPa, 394 MPa, and 14%, respectively, which are close to the reference values in as-cast. The in vitro corrosion rates determined by immersion and potentiodynamic tests were 2.6 mm/year and 1.3 mm/year, respectively. Cytotoxicity tests indicated good biocompatibility of the 3D-printed alloy.
Anglický abstrakt
In this work, selective laser melting (SLM) technology was used to prepare Mg-4Y-3Nd-Zr (WE43) alloy. This alloy and production method are promising for the design of biodegradable implants. The aim of this study was to investigate the chemical composition, microstructure, mechanical properties, corrosion behavior in simulated body fluid (SBF), and cytotoxicity of the alloy produced by SLM method and to compare it with conventionally gravity cast reference alloy. Analysis of the surface of the revealed an oxygen content of 7 wt.%. Undesirable unmelted and only partially adhered spherical particles of the starting powder were also found. The microstructure of the material was very fine and consisted of alpha-Mg dendritic matrix, beta-Mg-41(Nd, Y)(5) intermetallic phase, Y2O3 inclusions, and 0.6 vol.% of residual porosity. The Vickers hardness, compressive yield strength, compressive strength, and maximum compressive strain were 88 HV0.1, 201 MPa, 394 MPa, and 14%, respectively, which are close to the reference values in as-cast. The in vitro corrosion rates determined by immersion and potentiodynamic tests were 2.6 mm/year and 1.3 mm/year, respectively. Cytotoxicity tests indicated good biocompatibility of the 3D-printed alloy.
Klíčová slova anglicky
3D printing; selective laser melting; WE43; Mg-alloy; mechanical properties
Vydáno
10.03.2022
Nakladatel
MDPI
Místo
BASEL
ISSN
2075-4701
Ročník
12
Číslo
3
Počet stran
16
BIBTEX
@article{BUT182742,
author="Patrícia {Lovašiová} and Tomáš {Lovaši} and Jiří {Kubásek} and Eva {Jablonská} and Šárka {Msallamová} and Alena {Michalcová} and Dalibor {Vojtěch} and Jan {Suchý} and Daniel {Koutný} and Enas {Alzubi},
title="Biodegradable WE43 Magnesium Alloy Produced by Selective Laser Melting: Mechanical Properties, Corrosion Behavior, and In-Vitro Cytotoxicity",
year="2022",
volume="12",
number="3",
month="March",
publisher="MDPI",
address="BASEL",
issn="2075-4701"
}