Detail publikace

Numerical study of the air injection method into the flat-panel photobioreactor

REBEJ, M. VONDÁL, J. JEGLA, Z.

Anglický název

Numerical study of the air injection method into the flat-panel photobioreactor

Typ

článek ve sborníku mimo WoS a Scopus

Jazyk

en

Originální abstrakt

Computational Fluid Dynamics (CFD) is used to investigate the effect of a boundary condition on bubbly flow. The fluid domain is based on a section of a lab-scale photobioreactor where the gaseous phase is injected into the water. The paper presents two means of gaseous phase injection. The first method uses the mass-source term defined in a dedicated cell zone. The second approach follows the real-world setup where the air flows through the orifice modelled as a surface area on the aerator tube. Numerical results are analysed in terms of the equivalent diameter, bubble aspect ratio and specific dimensionless numbers. It was found that the size and shape of bubbles are independent of the boundary condition definition. However, the difference in the bubble rising velocity was observed. Furthermore, the position of the separation point and the size of the gaseous plume was found to be different among the studied cases.

Anglický abstrakt

Computational Fluid Dynamics (CFD) is used to investigate the effect of a boundary condition on bubbly flow. The fluid domain is based on a section of a lab-scale photobioreactor where the gaseous phase is injected into the water. The paper presents two means of gaseous phase injection. The first method uses the mass-source term defined in a dedicated cell zone. The second approach follows the real-world setup where the air flows through the orifice modelled as a surface area on the aerator tube. Numerical results are analysed in terms of the equivalent diameter, bubble aspect ratio and specific dimensionless numbers. It was found that the size and shape of bubbles are independent of the boundary condition definition. However, the difference in the bubble rising velocity was observed. Furthermore, the position of the separation point and the size of the gaseous plume was found to be different among the studied cases.

Klíčová slova anglicky

Multiphase flow; VOF model; Bubbly flow; Boundary condition

Vydáno

17.06.2021

Místo

Ottawa, Canada

ISBN

978-1-927877-89-0

ISSN

2371-5316

Kniha

Proceedings of the 6th World Congress on Momentum, Heat and Mass Transfer (MHMT 2021)

Strany od–do

305-1–305-8

Počet stran

8

BIBTEX


@inproceedings{BUT171840,
  author="Miroslav {Rebej} and Jiří {Vondál} and Zdeněk {Jegla},
  title="Numerical study of the air injection method into the flat-panel photobioreactor",
  booktitle="Proceedings of the 6th World Congress on Momentum, Heat and Mass Transfer (MHMT 2021)",
  year="2021",
  month="June",
  pages="305-1--305-8",
  address="Ottawa, Canada",
  isbn="978-1-927877-89-0",
  issn="2371-5316"
}