Detail publikace
Importance of Geometrical Factors on Spray Characteristics of Spill-return Atomisers
JEDELSKÝ, J. MALÝ, M. JÍCHA, M. SLÁMA, J. WIGLEY, G.
Anglický název
Importance of Geometrical Factors on Spray Characteristics of Spill-return Atomisers
Typ
článek v časopise ve Web of Science, Jimp
Jazyk
en
Originální abstrakt
An experimental investigation into small pressure-swirl spill-return atomizers was made to determine the effect of the entry port number, swirl chamber shape, spill-line design and the manufacturing precision on the spray quality and stability. The atomizers were experimentally studied using phase-Doppler anemometry, high-speed visualization and mechanical patternation. The Jet A-1 fuel was sprayed at inlet pressures of 0.5, 1.0 and 1.5 MPa and for spill-to-feed ratios of 0, 0.4 and 0.8. The chamber shape influenced the spray characteristics of the simplex atomizers only moderately with no systematic effect of conical chambers to the others. The spray was found to be circumferentially heterogeneous; its uniformity improved with increase in the pressure while the effect of swirling port number was negligible. Atomizers with axial spill orifice demonstrated strong spray pulsations at a spill-to-feed ratio of zero. A periodic decay of the air core was identified as a possible reason for the pulsations. Atomizers with the off-axis spill orifices always produced a stable spray. The atomizers with tangential inlet ports provided a finer spray than those with the helical ports. The manufacturing precision, axial symmetry and matching of the surfaces of connected parts were found important for the spray symmetry and homogeneity.
Anglický abstrakt
An experimental investigation into small pressure-swirl spill-return atomizers was made to determine the effect of the entry port number, swirl chamber shape, spill-line design and the manufacturing precision on the spray quality and stability. The atomizers were experimentally studied using phase-Doppler anemometry, high-speed visualization and mechanical patternation. The Jet A-1 fuel was sprayed at inlet pressures of 0.5, 1.0 and 1.5 MPa and for spill-to-feed ratios of 0, 0.4 and 0.8. The chamber shape influenced the spray characteristics of the simplex atomizers only moderately with no systematic effect of conical chambers to the others. The spray was found to be circumferentially heterogeneous; its uniformity improved with increase in the pressure while the effect of swirling port number was negligible. Atomizers with axial spill orifice demonstrated strong spray pulsations at a spill-to-feed ratio of zero. A periodic decay of the air core was identified as a possible reason for the pulsations. Atomizers with the off-axis spill orifices always produced a stable spray. The atomizers with tangential inlet ports provided a finer spray than those with the helical ports. The manufacturing precision, axial symmetry and matching of the surfaces of connected parts were found important for the spray symmetry and homogeneity.
Klíčová slova anglicky
Pressure-swirl atomizer; Spill-line orifice; Air core stability; Spray quality; Atomizer design; Manufacturing precision
Vydáno
01.05.2021
Nakladatel
American Institute of Aeronautics and Astronautics
Místo
12700 Sunrise Valley Drive, Suite 200, Reston, VA 20191-5807
ISSN
1533-3876
Ročník
37
Číslo
3
Strany od–do
408–418
Počet stran
11
BIBTEX
@article{BUT168035,
author="Jan {Jedelský} and Milan {Malý} and Miroslav {Jícha} and Jaroslav {Sláma} and Graham {Wigley},
title="Importance of Geometrical Factors on Spray Characteristics of Spill-return Atomisers",
year="2021",
volume="37",
number="3",
month="May",
pages="408--418",
publisher="American Institute of Aeronautics and Astronautics",
address="12700 Sunrise Valley Drive, Suite 200, Reston, VA 20191-5807",
issn="1533-3876"
}