Influence of Condensation on the Outer Surface of Polymer Hollow Fiber Heat Exchangers during Heat Transfer

článek ve sborníku ve WoS nebo Scopus

en

This paper shows the results of condensation tests for PHFHEs that consist of 6 equivalent layers of polypropylene fibers with a length of 190 mm. The total number of fibers is 798. The air humidity was set to 50% with an air temperature of 27°C, which are the typical conditions for such tests in air conditioning technology. Another important parameter was the velocity of the air. Testing velocities were chosen as 3 m s-1 and 1 m s-1. The influence of gravity was studied by putting the PHFHEs in three different positions. The fibers were placed in horizontal and vertical positions, and in a position where fibers form an angle of 45° with the ground. The study showed the ineffectiveness of placing the PHFHE in a horizontal position and suggests that it is better to have a larger distance between the layers of fibers.

This paper shows the results of condensation tests for PHFHEs that consist of 6 equivalent layers of polypropylene fibers with a length of 190 mm. The total number of fibers is 798. The air humidity was set to 50% with an air temperature of 27°C, which are the typical conditions for such tests in air conditioning technology. Another important parameter was the velocity of the air. Testing velocities were chosen as 3 m s-1 and 1 m s-1. The influence of gravity was studied by putting the PHFHEs in three different positions. The fibers were placed in horizontal and vertical positions, and in a position where fibers form an angle of 45° with the ground. The study showed the ineffectiveness of placing the PHFHE in a horizontal position and suggests that it is better to have a larger distance between the layers of fibers.

Heat transfer; polymer hollow fiber; heat exchanger; condensation

10.06.2018

American Society of Mechanical Engineers

978-0-7918-5119-7

ASME 2018 16th International Conference on Nanochannels, Microchannels, and Minichannels

1–6

6