Detail publikace

Mechanical properties of AlSi10Mg alloy processed by SLM

PANTĚLEJEV, L. ŠTĚPÁNEK, R. KOUTNÝ, D. PALOUŠEK, D.

Anglický název

Mechanical properties of AlSi10Mg alloy processed by SLM

Typ

článek v časopise - ostatní, Jost

Jazyk

en

Originální abstrakt

The paper deals with mechanical properties of AlSi10Mg aluminium alloy processed by the selective laser melting (SLM) technique. The influence of surface quality and building orientation of the samples on mechanical properties was evaluated. It was found that orientation of the samples had no effect on tensile properties (UTS, 0.2% proof stress) whereas surface quality had a significant effect. An 11% increase in ultimate tensile strength was found in the case of samples of lower surface roughness, and an increase of almost factor two in elongation at break was found for machined samples in comparison to as-built samples.

Anglický abstrakt

The paper deals with mechanical properties of AlSi10Mg aluminium alloy processed by the selective laser melting (SLM) technique. The influence of surface quality and building orientation of the samples on mechanical properties was evaluated. It was found that orientation of the samples had no effect on tensile properties (UTS, 0.2% proof stress) whereas surface quality had a significant effect. An 11% increase in ultimate tensile strength was found in the case of samples of lower surface roughness, and an increase of almost factor two in elongation at break was found for machined samples in comparison to as-built samples.

Klíčová slova anglicky

AlSi10Mg; SLM; microstructure; mechanical properties; fracture behaviour

Vydáno

10.02.2018

Nakladatel

University of Žilina

Místo

Žilina, Slovensko

ISSN

1338-6174

Ročník

24

Číslo

4

Strany od–do

108–114

Počet stran

7

BIBTEX


@article{BUT148499,
  author="Libor {Pantělejev} and Roman {Štěpánek} and Daniel {Koutný} and David {Paloušek},
  title="Mechanical properties of AlSi10Mg alloy processed by SLM",
  year="2018",
  volume="24",
  number="4",
  month="February",
  pages="108--114",
  publisher="University of Žilina",
  address="Žilina, Slovensko",
  issn="1338-6174"
}