Detail publikace
Eccentricity Effect in the Hole-Drilling Residual Stress Measurement
NÁVRAT, T. HALABUK, D. VLK, M. VOSYNEK, P.
Anglický název
Eccentricity Effect in the Hole-Drilling Residual Stress Measurement
Typ
článek ve sborníku ve WoS nebo Scopus
Jazyk
en
Originální abstrakt
The paper focuses on the analysis of the eccentricity effect in the measurement of the hole-drilling residual stress. Relaxed strains were evaluated by computational simulation of the hole-drilling experiment using the finite element method. Errors induced by eccentricity were estimated for elastic and elastic-plastic states in area around the drilled hole due to the stress concentration. The invariance of the stress change with depth was assumed. The correction of eccentricity and plasticity effects in evaluation of residual stresses was realized within the EVAL 7 software (SINT Technology). The analysis shows that in elastic state the eccentricity and angular position of the drilled hole have a significant effect on relative residual stress errors. Correction according to the HDM method is very effective in this case. If the relative error of 5 % is allowed, which is in engineering practice acceptable, eccentricity of ±0.05 mm could be accepted without correction. When the combination of eccentricity and plasticity occurs, the correction of plasticity is more important in method 13-EXT-UN.
Anglický abstrakt
The paper focuses on the analysis of the eccentricity effect in the measurement of the hole-drilling residual stress. Relaxed strains were evaluated by computational simulation of the hole-drilling experiment using the finite element method. Errors induced by eccentricity were estimated for elastic and elastic-plastic states in area around the drilled hole due to the stress concentration. The invariance of the stress change with depth was assumed. The correction of eccentricity and plasticity effects in evaluation of residual stresses was realized within the EVAL 7 software (SINT Technology). The analysis shows that in elastic state the eccentricity and angular position of the drilled hole have a significant effect on relative residual stress errors. Correction according to the HDM method is very effective in this case. If the relative error of 5 % is allowed, which is in engineering practice acceptable, eccentricity of ±0.05 mm could be accepted without correction. When the combination of eccentricity and plasticity occurs, the correction of plasticity is more important in method 13-EXT-UN.
Klíčová slova anglicky
residual stresses, hole-drilling method, plasticity, eccentricity
Vydáno
10.01.2018
Nakladatel
Trans Tech Publications Ltd
ISBN
978-3-0357-1209-4
ISSN
1662-9507
Kniha
Engineering and Innovative Materials VI
Ročník
382
Číslo
1
Strany od–do
208–212
Počet stran
5
BIBTEX
@inproceedings{BUT139312,
author="Tomáš {Návrat} and Dávid {Halabuk} and Miloš {Vlk} and Petr {Vosynek},
title="Eccentricity Effect in the Hole-Drilling Residual Stress Measurement",
booktitle="Engineering and Innovative Materials VI",
year="2018",
volume="382",
number="1",
month="January",
pages="208--212",
publisher="Trans Tech Publications Ltd",
isbn="978-3-0357-1209-4",
issn="1662-9507"
}