Detail publikace

Biaxiální zkouška trubek s využitím elastomeru

PETERKOVÁ, E.

Český název

Biaxiální zkouška trubek s využitím elastomeru

Anglický název

Biaxial test of tubes using elastomer

Typ

článek v časopise ve Scopus, Jsc

Jazyk

en

Originální abstrakt

To obtain the values of material characteristics of tubes such as the strain hardening exponent n and the strength coefficient K is most frequently used the hydraulic bulge test. The tool and an additional equipment are often complicated and very expensive for this test. This article deals with the question whether it would be possible to obtain the corresponding values n and K by the simple biaxial test of tube using elastomer. To solve this problem, a simple tool was designed and the verification tests were realized for thin-walled tubes from material AISI 321. The results showed that it’s not possible to obtain real values n and K by biaxial test of tubes using elastomer. The reason is the elastic forming medium, which complicates the evaluation of these material characteristics, because the elastomer introduces many additional factors into the forming process.

Český abstrakt

Pro získání hodnot materiálových charakteristik trubek jako jsou exponent deformačního zpevnění n a materiálová konstanta K se nejčastěji užívá zkouška vyboulování trubek kapalinou tzv. tube hydroforming. Nástroj a přídavná zařízení často bývají komplikovaná a cenově nákladná. Tento článek se zabývá otázkou, zda by bylo možné pro získání odpovídajících hodnot n a K užít jednoduchou biaxialní zkoušku trubek s využitím elastomeru. Pro řešení tohoto problému byl navržen jednoduchý nástroj a provedeny ověřovací zkoušky u tenkostěnných trubek z materiálu AISI 321. Výsledky zkoušek ukázaly, že biaxiální zkouškou trubek pomocí elastomeru nelze získat reálné hodnoty n a K. Důvodem je elastické tvářecí medium, které komplikuje vyhodnocování materiálových charakteristik, protože do procesu tváření vnáší mnoho přídavných faktorů.

Anglický abstrakt

To obtain the values of material characteristics of tubes such as the strain hardening exponent n and the strength coefficient K is most frequently used the hydraulic bulge test. The tool and an additional equipment are often complicated and very expensive for this test. This article deals with the question whether it would be possible to obtain the corresponding values n and K by the simple biaxial test of tube using elastomer. To solve this problem, a simple tool was designed and the verification tests were realized for thin-walled tubes from material AISI 321. The results showed that it’s not possible to obtain real values n and K by biaxial test of tubes using elastomer. The reason is the elastic forming medium, which complicates the evaluation of these material characteristics, because the elastomer introduces many additional factors into the forming process.

Klíčová slova česky

biaxiální zkouška; trubka; elastomer; exponent deformačního zpevnění

Klíčová slova anglicky

biaxial test; tube; elastomer; strain hardenig exponent

Vydáno

15.08.2016

Nakladatel

J. E. Purkyne University in Usti n. Labem

Místo

Ústí nad Labem

ISSN

1213-2489

Ročník

16

Číslo

4

Strany od–do

765–771

Počet stran

7

BIBTEX


@article{BUT131904,
  author="Eva {Peterková},
  title="Biaxial test of tubes using elastomer",
  year="2016",
  volume="16",
  number="4",
  month="August",
  pages="765--771",
  publisher="J. E. Purkyne University in Usti n. Labem",
  address="Ústí nad Labem",
  issn="1213-2489"
}