Detail publikace
Vliv parametrů pískování na využití adheze v kontaminovaném kontaktu kolo-kolejnice
OMASTA, M. MACHATKA, M SMEJKAL, D. KŘUPKA, I. HARTL, M.
Český název
Vliv parametrů pískování na využití adheze v kontaminovaném kontaktu kolo-kolejnice
Anglický název
Influence of sanding parameters on adhesion recovery in contaminated wheel–rail contact
Typ
článek v časopise ve Web of Science, Jimp
Jazyk
en
Originální abstrakt
In this work a new twin-disc machine in scale 1:3 was developed and addressed to the study of wheel/rail adhesion under different contact conditions. An influence of sanding parameters such as sand quantity, wheel slip and rolling speed was investigated using a real sanding system in the contact contaminated with water, leaves and wheel flange grease. It has been shown that under wet, leaf or grease contamination, quantity of the sand applied during fixed time period has significant effect on adhesion recovery only for low wheel slip and low rolling speed. In the contaminated contact the effect of sanding on adhesion recovery increases with wheel slip and rolling speed.
Český abstrakt
V této práci byl vyvinut nový stroj se dvěma disky v měřítku 1: 3 ke studiu adheze mezi kolem a kolejnicí za různých podmínek. Vliv parametrů pískování, jako je množství písku, prokluzu kol a rychlosti valení byl zkoumán pomocí reálného pískovacího systému v kontaktu kontaminovaného vodou, listy a plastickým mazivem. Bylo prokázáno, že za mokra má množství písku aplikovaného během pevně stanoveného časového období významný vliv na využití adheze pouze pro nízké prokluzy kol a nízké rychlosti valení.
Anglický abstrakt
In this work a new twin-disc machine in scale 1:3 was developed and addressed to the study of wheel/rail adhesion under different contact conditions. An influence of sanding parameters such as sand quantity, wheel slip and rolling speed was investigated using a real sanding system in the contact contaminated with water, leaves and wheel flange grease. It has been shown that under wet, leaf or grease contamination, quantity of the sand applied during fixed time period has significant effect on adhesion recovery only for low wheel slip and low rolling speed. In the contaminated contact the effect of sanding on adhesion recovery increases with wheel slip and rolling speed.
Klíčová slova česky
Kolo/kolejnice; Součinitel adheze; Písek; Listy; Prokluz; Dvoudiskový stroj
Klíčová slova anglicky
Wheel/rail; Adhesion coefficient; Sand; Leaves; Rolling–sliding; Twin-disc
Rok RIV
2015
Vydáno
15.01.2015
Nakladatel
Elsevier
Místo
Švýcarsko
ISSN
0043-1648
Ročník
322-323
Číslo
1
Strany od–do
218–225
Počet stran
8
BIBTEX
@article{BUT111252,
author="Milan {Omasta} and David {Smejkal} and Ivan {Křupka} and Martin {Hartl},
title="Influence of sanding parameters on adhesion recovery in contaminated wheel–rail contact",
year="2015",
volume="322-323",
number="1",
month="January",
pages="218--225",
publisher="Elsevier",
address="Švýcarsko",
issn="0043-1648"
}