Detail publikace
K-kalibrace speciálních vzorků pro růst únavových trhliny v módech II, III and II+III
HORNÍKOVÁ, J. ŽÁK, S. ŠANDERA, P.
Český název
K-kalibrace speciálních vzorků pro růst únavových trhliny v módech II, III and II+III
Anglický název
K-calibration of Special Specimen for Mode II, III and II+III Crack Growth
Typ
abstrakt
Jazyk
en
Originální abstrakt
General knowledge in the field of fatigue cracks under remote mode II and III loadings remains to be poor. A commonly accepted description of the crack growth rate and threshold conditions as well as details of micromechanisms of mode II and III cracks are still a subject of an intensive research. Also, experiments ensuring a pure mode II and III crack tip loading are extremely difficult to develop. Therefore, an original testing setup has been designed for performing pure remote mode II and III crack propagation in a single cylindrical specimen with a circumferential crack. The aim of this work is to make a K-calibration above mentioned specimen that will be used for a description of stability and growth of mode II and III fatigue cracks in the near-threshold region.
Český abstrakt
Všeobecné znalosti v oblasti únavových trhlin zatěžovaných v módech II a III jsou dosud malé. Běžně přijímaný popis rychlosti šíření trhlin a prahových podmínek, jakož i podrobnosti o mikromechanismech šíření trhlin v módech II a III jsou stále předmětem intenzivního výzkumu. Také experimenty zajišťující prostý mód II a III je dosud velmi obtížné rozvíjet. Proto bylo navrženo originální testovací zařízení pro realizaci prostého zatížení ve vzdálených módech II a III v jediném válcovém vzorku s obvodovou trhlinou. Cílem této práce je stanovit K-kalibraci výše uvedených vzorků, která bude použita pro popis stability a růstu únavových trhlin v módech II a III v blízké prahové oblasti.
Anglický abstrakt
General knowledge in the field of fatigue cracks under remote mode II and III loadings remains to be poor. A commonly accepted description of the crack growth rate and threshold conditions as well as details of micromechanisms of mode II and III cracks are still a subject of an intensive research. Also, experiments ensuring a pure mode II and III crack tip loading are extremely difficult to develop. Therefore, an original testing setup has been designed for performing pure remote mode II and III crack propagation in a single cylindrical specimen with a circumferential crack. The aim of this work is to make a K-calibration above mentioned specimen that will be used for a description of stability and growth of mode II and III fatigue cracks in the near-threshold region.
Klíčová slova anglicky
K-calibration; Special Specimen; Mode II, III and II+III; Crack Growth
Vydáno
05.04.2012
Nakladatel
Mansfield College
Místo
Oxford
Kniha
8th Meeting of the TC2 on Micromechanisms (ESIS)
Číslo edice
1
Strany od–do
35–35
Počet stran
1